GEL USE

Cavitation

Use Ultrasound Gel or Aloe Vera Gel for the Cavitation feature.
Apply a generous amount to the treatment area.
Reapply as needed during the session, as the gel will gradually dry out.

Radio Frequency (RF)

Use a Glycerin-based Gel for the RF feature (both body and face).
If using the Vacuum + RF function, avoid applying too much gel to prevent it from being drawn into the device.

Glycerin spreads well and assists with even heat distribution.
No gels are required with Laser Lipolysis.

FEATURES AND INTENSITY LEVELS

40kHz Cavitation

This feature is specifically used for fat cell disruption.

• Work on one area for 20–40 minutes per session.

• Allow 72 hours between sessions on the same area.

• Use slow vertical, horizontal, or circular movements while gently pressing the probe into the skin.

• A high-pitched sound is normal due to 40kHz ultrasound waves.

• Levels A, B, C, and D control the depth and intensity of penetration.

◦ D – Deep and slow, best for larger areas (stomach, thighs, bum)

◦ B & C – Medium levels for smaller or less fatty areas (arms, flanks)

◦ A – For thinner areas of fat

⚠ Never use on the throat or over the heart.

Only treat areas with visible fat tissue (not bone).

Radio Frequency (RF)

Used primarily for skin tightening and collagen stimulation.

• Smaller prong handles for delicate areas (temples, under eyes, nose area).

• Larger prongs for body and broader facial areas (forehead, chin, jawline, stomach, arms, etc.).

• Use controlled circular motions during treatment.

• 20–30 minutes for smaller areas (face)

• 30–60 minutes for larger areas (body)

• Use every 4–7 days, depending on skin sensitivity and recovery.

⚠ The area will feel warm — stop if it becomes too hot to avoid burns.

Start on lower levels and gradually increase as tolerated.

Vacuum + RF

This feature combines suction and heat to enhance circulation and skin firmness.

It works best immediately after a Cavitation session, helping move and flush out disrupted fat

cells through the lymphatic system.

The vacuum suction can be adjusted on the machine screen or with a turn dial situated on the right

side of the machine

• Use for 10–20 minutes following Cavitation

• Every 72 hours

• Adjust suction intensity to a comfortable level

⚠ Not for facial use.Laser Lipolysis (Laser Lipo Pads)

The Laser Lipolysis feature uses low-level laser energy (LLLT) to target and shrink fat cells non-

invasively.

This treatment helps reduce body circumference, smooth the skin’s surface, and support fat mobilisation

metabolism — especially when combined with Cavitation or RF.

• Recommended Duration:

◦ 30–40 minutes per session on targeted areas (abdomen, thighs, arms, or hips).

• Frequency:

◦ Use 2–3 times per week, with at least 48 hours between sessions on the same area.

• Placement:

◦ Attach pads directly onto clean, dry skin over the treatment area.

◦ You may secure them with the provided straps or band.

• Combination Tip:

◦ For optimal results, use Cavitation for deeper disruption (30 mins) and Vacuum + RF (10 mins) to enhance circulation and tightening followed by Laser Lipolysis (20 mins) if wanting to use all in 1 treatment session

• Post-Treatment:

◦ Drink plenty of water and maintain light activity (such as walking) within 24 hours to help metabolise released fat through natural detox pathways.

⚠ Do not use the Laser Lipo pads on the face, neck, chest, or over internal organs.
Avoid if pregnant or breastfeeding.

SIMPLIFIED INSTRUCTIONS

Cavitation

• 20–40 mins per body part

• Every 72 hours

Vacuum + RF

• 10–20 mins after Cavitation

• Every 72 hours

Radio Frequency (RF)

• Face: 20–30 mins• Body: 30–60 mins

• Every 4–7 days

Laser Lipolysis Pads

• 30–40 mins per area

• 2–3 times per week (minimum 48 hrs between)